DIGITAL ELECTRONICS PLC

📌 DHT11 Temperature Humidity Sensor DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V with Wires for Arduino Raspberry Pi 2 3 ♦️ Power supply voltage: 3.3~5.5V DC ♦️ Output: the single bus digital signal ♦️ Measuring range: 20-90%RH humidity, temperature 0~50° ♦️ The measurement accuracy of +-5%RH: humidity, temperature +-2 ° ♦️ Resolution: 1%RH humidity, temperature 1 ° ♦️ Exchangeability: fully interchangeable ♦️ Long term stability: < ± 1%RH ✨ DHT11 : Interface Description: 1.VCC:External 3.3 V-5 V 2.GND:External GND 3.DO:Small board switch digital output interface, connect the microcontroller IO port ✨ DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor. 📌 Price 600Birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com

📌Universal Power Adapter Universal Notebook Power Adapter Charger 12v,16v,18v,19v,20v,24V 4.5A ♦️ 8 different size detachable plugs, Works with Most Notebook Computers and other motors. ♦️ Adjustable output voltage, DC 12V/15V/16V/18V/19V/20V/24V ♦️ Built-in dual -protection design, overload protection, over voltage protection. ♦️ AC Input Range: AC110-240V ♦️ Indicator:LED ♦️ Compatible Brand:Universal ♦️ Output Range: 12V-24V, 4.5 A ♦️ Voltage adjustment ≤+/-1V ♦️ Load regulation≤1% 📌 Price 1700Birr 📌 Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com

📌 30A ESC Brushless Motor Speed Controller GTPBAO Power Science RC BEC ESC Motor Controller, 30A ESC Brushless Motor Speed Controller for T-rex 450 V2 Helicopter Boat Engine Projects Product Description Features: ♦️ The Brushless ESC is special one for the electirc helicopter 450 class, ♦️ it has the best performance for 3D fly. ♦️ It will your best choice the 450 calss Helicopter. ♦️ Size: 57mm x 25mm x 8mm ♦️ Sustaining Input Voltage: 6-12V ♦️ BEC Output Current: 5V/3A ♦️ Continuous Output Current: 30A ♦️ Max Current: 35A/12s ♦️ Weight:25g Packet content: ✨ 100% Brand New ✨ 1X 30A Brushless ESC ✨ Sustaining Input Voltage: 6-12V; BEC Output Current: 5V/3A ✨ Continuous Output Current: 30A; Max Current: 35A/12s ✨ Size: 57mm x 25mm x 8mm; Weight:25g ✨ Easy to install, Beautifully designed 📌 Price 2000Birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com

📌 30A ESC Brushless Motor Speed Controller GTPBAO Power Science RC BEC ESC Motor Controller, 30A ESC Brushless Motor Speed Controller for T-rex 450 V2 Helicopter Boat Engine Projects Product Description Features: ♦️ The Brushless ESC is special one for the electirc helicopter 450 class, ♦️ it has the best performance for 3D fly. ♦️ It will your best choice the 450 calss Helicopter. ♦️ Size: 57mm x 25mm x 8mm ♦️ Sustaining Input Voltage: 6-12V ♦️ BEC Output Current: 5V/3A ♦️ Continuous Output Current: 30A ♦️ Max Current: 35A/12s ♦️ Weight:25g Packet content: ✨ 100% Brand New ✨ 1X 30A Brushless ESC ✨ Sustaining Input Voltage: 6-12V; BEC Output Current: 5V/3A ✨ Continuous Output Current: 30A; Max Current: 35A/12s ✨ Size: 57mm x 25mm x 8mm; Weight:25g ✨ Easy to install, Beautifully designed 📌 Price 2000Birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com

📌 Drv8825 Stepper Motor Driver Drv8825 Stepper Motor Driver with Aluminum Heat Sink ♦️ Product description ♦️ The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver. The DRV8825 features ✨ adjustable current limiting, ✨ over-current and over-temperature protection, and ✨ six micro step resolutions (down to 1/32-step). ✨ It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow . ✨ This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver ✨ This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil. 📌 Price 600birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com

📌 4s 14.8V 2200mAh Li-po Battery Liperior 2200mAh 4S 50C 14.8V Lipo Battery With XT60 Plug for RC Plane / Heli The Liperior battery has been developed using the latest in Lipo technology. ♦️ Capacity: 2200mAh ♦️ Cell Count: 4s ♦️ Voltage: 14.8V ♦️ Constant Discharge: 50C ♦️ Peak Discharge: 100C ♦️ Maximum Charge Rate: 5C ♦️ Battery Size: 102 x 35 x 32.5mm ♦️ Battery Weight: 235g ♦️ Charge Plug: JST-XHR ♦️ Discharge Plug: XT60 Key Features: ✨ Superior Discharge rate ✨ Low Internal Resistance (IR) ✨ Outstanding Cycle Performance ✨ Ideal for Scale Fixed Wing, RC Helicopters, RC Boats, and Multi-Rotors 📌 Price Contact    📱0914-839754  @R0bel            📱0974197825

📌LCD Display for Ramps 1.4 3D Printer - LCD 12864 Graphic Smart Display Controller Module with Connector Adapter & Cable for RepRap RAMPS 1.4 3D Printer kit Red-SCLL Full Graphic Smart Controller 12864 LCD Display for RAMPS 1.4 RepRap 3D Printer Description: ♦️ The smart controller includes ♦️ a USB card reader, ♦️ rotary encoders and ♦️ 12864lcd display. You can easily connect it to your ramps 1.4 card including the "smart adapter". ♦️ Connect this panel ramps 1.4, you don't need your computer, SD card, smart controller power supply. ♦️ All other operations like calibration, axis movement can be done with just one rotary encoder smart controller. ♦️ Printing 3D design without a computer, just use G code design stored in SD card. Package list: ✨ 1 * LCD 12864 ✨ 1 * adapter ✨ 2 * cable 📌 Price 2500birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com

📌 GRBL 2 axis control board ♦️ ANNOYTOOLS 2-Axis Control Board GRBL 1.1f CNC Controller Board-2-Axis Machine-CNC Laser ♦️ Faster and more stable performance ♦️ Equipped with a 32-bit MCU control board ♦️ this 2-axis control board can achieve a maximum no-load speed of up to 40000mm/min. ♦️ Convenient and stable USB interface ♦️ This control board features a Type-C USB interface ♦️ supports USB auto-recognition and has a built-in buzzer alarm to alert users if an error occurs. ♦️ This control board is ideal for laser engraving machines and 2-axis CNC machines. ♦️ It also supports connecting to an offline controller. ✨ PWM output frequency of 10kHz ✨ Dual Y-axis drivers ✨ Built-in laser burn protection mode ✨ 5V power output port 📌 Price 6500birr Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com

📌Tapered Ball Nose End Mill Tapered Ball Nose End Mill 1/4" X 3" with Radius of 0.25mm and 0.5mm Ball Nose 5.26Deg for CNC Machine Engraving Carving Bits H-Si Coated ✨ About this item ♦️ Tapered angle Ball Nose End Mill / Cone Cutters ♦️ 3.175mm Shank Diameter, 2 Flutes, H-Si Coated ♦️ Ball Raidus: 0.25mm and 0.5mm, Single Side Angel: 5.2Deg ♦️ For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc ♦️ Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time ✨ Product description ♦️ Shank Diameter: 3.175mm ♦️ Material: Solid Tungsten Carbide ♦️ Coating: H-Si ♦️ Overall Length: 38mm ♦️ Worked Material Hardness: HRC55 ♦️ Flutes: 2 Flutes ♦️ Radius: 0.25mm and 0.5mm ♦️ Single Side Angel: 5.26Deg 📌 Price Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com

📌 Bigtreetech Direct Octopus V1.1 Control Board The mainboard is compatible with Klipper, Raspberry and Marlin open-source software. ♦️ 180 Mhz ARM-Cortex-M4 CPU ♦️ Firmware upgrade via SD card ♦️ Update the configuration firmware from the SD card. This method is simple, convenient, and efficient. ♦️ Compatible stepper driver interfaces: SPI, UART, STEP / DIR Matching screens: ♦️ TFT touch screens ♦️ 6 x controllable PWM fans ♦️ 2 x normal fans ♦️ 3 x adjustable voltages for the fans (5V, 12V and 24V) ♦️ Other interfaces: ♦️ 8 x stepper driver connections ♦️ Raspberry PI Interface ♦️ CAN BUS, SPI and I2C for extensions ♦️ USB-C ♦️ Dual Z-axis ♦️ 4 x heating cartridge connections ♦️ RGB LED ♦️ WiFi interface for ESP8266 based modules ♦️ On-board EEPROM ♦️ High power MOSFET ♦️ Support of automatic shutdown after printing and resume print 📌 Price Contact    📱0914-839754  @R0bel            📱0974197825 📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ  103ለ https://digitalelectronicsplc.com